Spur gear catalog › Module 3 › 45 teeth

Module 3 spur gear, 45 teeth

A 45-tooth involute spur gear, module 3, 20° pressure angle, printed to order in nylon 12. Choose a plain bore that presses onto the shaft, or a hub with a set screw, or open it in the generator to change the bore, hub or width and download free STEP, STL and DXF files.

PitchModule 3 (8.47 DP)
Pressure angle20°
Teeth45
Pitch diameter135.00 mm
Outside diameter141.00 mm
Root diameter127.50 mm
Base diameter126.86 mm
Circular pitch9.42 mm
Face width18.00 mm
Bore20 mm: a light press fit on the plain style (it grips the shaft); a sliding fit on the hub style, held by the set screw
Hub (hub style)Ø33.50 × 10.00 mm, M5 × 5.7 brass set-screw insert, installed
Span over 5 teeth41.74 mm
MaterialNylon 12 (PA 12), laser sintered
Lead timeShips in 7 to 10 business days

Order

StylePart numberEach
Plain bore
20° PA, bore Ø20, allowance +0.05, 5 spoke windows
PG-S45-M300-QAB89SBJ$300.64
Hub with set screw
20° PA, bore Ø20, allowance +0.1, hub Ø33.5×10 (top), 5 spoke windows, 1× M5 × 5.7 set-screw insert, installed, set screw max 1 N·m
PG-S45-M300-EEZHM35F$311.03

No minimum quantity per part; orders have a $30 minimum before shipping. Shipping is $8 flat in the US.

Gears that mesh with it

Every Module 3 gear with a 20° pressure angle meshes with this one. Center distance = module × (teeth₁ + teeth₂) / 2.

Mating gearRatioCenter distance
12 teeth0.267 : 185.50 mm
14 teeth0.311 : 188.50 mm
15 teeth0.333 : 190.00 mm
16 teeth0.356 : 191.50 mm
18 teeth0.400 : 194.50 mm
20 teeth0.444 : 197.50 mm
22 teeth0.489 : 1100.50 mm
24 teeth0.533 : 1103.50 mm
25 teeth0.556 : 1105.00 mm
28 teeth0.622 : 1109.50 mm
30 teeth0.667 : 1112.50 mm
32 teeth0.711 : 1115.50 mm
35 teeth0.778 : 1120.00 mm
36 teeth0.800 : 1121.50 mm
40 teeth0.889 : 1127.50 mm
42 teeth0.933 : 1130.50 mm
48 teeth1.067 : 1139.50 mm
50 teeth1.111 : 1142.50 mm
54 teeth1.200 : 1148.50 mm