Spur gear catalog › Module 3 › 14 teeth

Module 3 spur gear, 14 teeth

A 14-tooth involute spur gear, module 3, 20° pressure angle, printed to order in nylon 12. Choose a plain bore that presses onto the shaft, or a hub with a set screw, or open it in the generator to change the bore, hub or width and download free STEP, STL and DXF files.

PitchModule 3 (8.47 DP)
Pressure angle20°
Teeth14
Pitch diameter42.00 mm
Outside diameter48.00 mm
Root diameter34.50 mm
Base diameter39.47 mm
Circular pitch9.42 mm
Face width18.00 mm
Bore10 mm: a light press fit on the plain style (it grips the shaft); a sliding fit on the hub style, held by the set screw
Hub (hub style)Ø23.50 × 10.00 mm, M5 × 5.7 brass set-screw insert, installed
Span over 2 teeth13.87 mm
MaterialNylon 12 (PA 12), laser sintered
Lead timeShips in 7 to 10 business days

Order

StylePart numberEach
Plain bore
20° PA, bore Ø10, allowance +0.05
PG-S14-M300-87XTY7CQ$40.02
Hub with set screw
20° PA, bore Ø10, allowance +0.1, hub Ø23.5×10 (top), 1× M5 × 5.7 set-screw insert, installed, set screw max 1 N·m
PG-S14-M300-TZYP6RCH$47.36

No minimum quantity per part; orders have a $30 minimum before shipping. Shipping is $8 flat in the US.

Gears that mesh with it

Every Module 3 gear with a 20° pressure angle meshes with this one. Center distance = module × (teeth₁ + teeth₂) / 2.

Mating gearRatioCenter distance
12 teeth0.857 : 139.00 mm
15 teeth1.071 : 143.50 mm
16 teeth1.143 : 145.00 mm
18 teeth1.286 : 148.00 mm
20 teeth1.429 : 151.00 mm
22 teeth1.571 : 154.00 mm
24 teeth1.714 : 157.00 mm
25 teeth1.786 : 158.50 mm
28 teeth2.000 : 163.00 mm
30 teeth2.143 : 166.00 mm
32 teeth2.286 : 169.00 mm
35 teeth2.500 : 173.50 mm
36 teeth2.571 : 175.00 mm
40 teeth2.857 : 181.00 mm
42 teeth3.000 : 184.00 mm
45 teeth3.214 : 188.50 mm
48 teeth3.429 : 193.00 mm
50 teeth3.571 : 196.00 mm
54 teeth3.857 : 1102.00 mm