Spur gear catalog › Module 3 › 12 teeth

Module 3 spur gear, 12 teeth

A 12-tooth involute spur gear, module 3, 20° pressure angle, printed to order in nylon 12. Choose a plain bore that presses onto the shaft, or a hub with a set screw, or open it in the generator to change the bore, hub or width and download free STEP, STL and DXF files.

PitchModule 3 (8.47 DP)
Pressure angle20°
Teeth12
Pitch diameter36.00 mm
Outside diameter42.00 mm
Root diameter28.50 mm
Base diameter33.83 mm
Circular pitch9.42 mm
Face width18.00 mm
Bore8 mm: a light press fit on the plain style (it grips the shaft); a sliding fit on the hub style, held by the set screw
Hub (hub style)Ø23.00 × 9.00 mm, M4 × 6.4 brass set-screw insert, installed
Span over 2 teeth13.79 mm
MaterialNylon 12 (PA 12), laser sintered
Lead timeShips in 7 to 10 business days

Order

StylePart numberEach
Plain bore
20° PA, bore Ø8, allowance +0.05
PG-S12-M300-FJD971M8$29.89
Hub with set screw
20° PA, bore Ø8, allowance +0.1, hub Ø23×9 (top), 1× M4 × 6.4 set-screw insert, installed, set screw max 0.6 N·m
PG-S12-M300-ADNYHSKT$36.64

No minimum quantity per part; orders have a $30 minimum before shipping. Shipping is $8 flat in the US.

Gears that mesh with it

Every Module 3 gear with a 20° pressure angle meshes with this one. Center distance = module × (teeth₁ + teeth₂) / 2.

Mating gearRatioCenter distance
14 teeth1.167 : 139.00 mm
15 teeth1.250 : 140.50 mm
16 teeth1.333 : 142.00 mm
18 teeth1.500 : 145.00 mm
20 teeth1.667 : 148.00 mm
22 teeth1.833 : 151.00 mm
24 teeth2.000 : 154.00 mm
25 teeth2.083 : 155.50 mm
28 teeth2.333 : 160.00 mm
30 teeth2.500 : 163.00 mm
32 teeth2.667 : 166.00 mm
35 teeth2.917 : 170.50 mm
36 teeth3.000 : 172.00 mm
40 teeth3.333 : 178.00 mm
42 teeth3.500 : 181.00 mm
45 teeth3.750 : 185.50 mm
48 teeth4.000 : 190.00 mm
50 teeth4.167 : 193.00 mm
54 teeth4.500 : 199.00 mm