Spur gear catalog › Module 3 › 50 teeth

Module 3 spur gear, 50 teeth

A 50-tooth involute spur gear, module 3, 20° pressure angle, printed to order in nylon 12. Choose a plain bore that presses onto the shaft, or a hub with a set screw, or open it in the generator to change the bore, hub or width and download free STEP, STL and DXF files.

PitchModule 3 (8.47 DP)
Pressure angle20°
Teeth50
Pitch diameter150.00 mm
Outside diameter156.00 mm
Root diameter142.50 mm
Base diameter140.95 mm
Circular pitch9.42 mm
Face width18.00 mm
Bore20 mm: a light press fit on the plain style (it grips the shaft); a sliding fit on the hub style, held by the set screw
Hub (hub style)Ø33.50 × 10.00 mm, M5 × 5.7 brass set-screw insert, installed
Span over 6 teeth50.81 mm
MaterialNylon 12 (PA 12), laser sintered
Lead timeShips in 7 to 10 business days

Order

StylePart numberEach
Plain bore
20° PA, bore Ø20, allowance +0.05, 4 spoke windows
PG-S50-M300-9NHR5F0C$364.44
Hub with set screw
20° PA, bore Ø20, allowance +0.1, hub Ø33.5×10 (top), 4 spoke windows, 1× M5 × 5.7 set-screw insert, installed, set screw max 1 N·m
PG-S50-M300-THXSP1TE$375.38

No minimum quantity per part; orders have a $30 minimum before shipping. Shipping is $8 flat in the US.

Gears that mesh with it

Every Module 3 gear with a 20° pressure angle meshes with this one. Center distance = module × (teeth₁ + teeth₂) / 2.

Mating gearRatioCenter distance
12 teeth0.240 : 193.00 mm
14 teeth0.280 : 196.00 mm
15 teeth0.300 : 197.50 mm
16 teeth0.320 : 199.00 mm
18 teeth0.360 : 1102.00 mm
20 teeth0.400 : 1105.00 mm
22 teeth0.440 : 1108.00 mm
24 teeth0.480 : 1111.00 mm
25 teeth0.500 : 1112.50 mm
28 teeth0.560 : 1117.00 mm
30 teeth0.600 : 1120.00 mm
32 teeth0.640 : 1123.00 mm
35 teeth0.700 : 1127.50 mm
36 teeth0.720 : 1129.00 mm
40 teeth0.800 : 1135.00 mm
42 teeth0.840 : 1138.00 mm
45 teeth0.900 : 1142.50 mm
48 teeth0.960 : 1147.00 mm
54 teeth1.080 : 1156.00 mm