Double gears and gear trains

A double gear, or cluster gear, is two gears on one body that turn together. It is the building block of the compound gear train, which gives a large reduction in a small space.

Figure 1. A double gear with 34 and 14 teeth, front and side view.

Compound trains

A single pair is limited to about 6 : 1 before the pinion becomes too small or the gear too large. A compound train multiplies ratios: the large gear of one double gear is driven by a pinion, and its small gear drives the next stage.

i = (z₂ / z₁) · (z₄ / z₃) · …

Two stages of 12 driving 36 give 3 × 3 = 9 : 1; three stages give 27 : 1. This is how clocks, servos and gearmotors get large ratios from small gears.

Designing a double gear

  • The two gears can have different modules. The small gear often carries more torque per tooth, so it may need a coarser module.
  • Check the small gear's root diameter against the bore. The wall between the root and the bore must be thick enough to carry the torque.
  • Printing both gears as one part removes the press fit, key or adhesive that joins two separate gears, and keeps them concentric.

Design a double gear with two tooth counts, two face widths and, if you like, two modules. Open the generator.