Spur gear catalog › Module 3 › 40 teeth

Module 3 spur gear, 40 teeth

A 40-tooth involute spur gear, module 3, 20° pressure angle, printed to order in nylon 12. Choose a plain bore that presses onto the shaft, or a hub with a set screw, or open it in the generator to change the bore, hub or width and download free STEP, STL and DXF files.

PitchModule 3 (8.47 DP)
Pressure angle20°
Teeth40
Pitch diameter120.00 mm
Outside diameter126.00 mm
Root diameter112.50 mm
Base diameter112.76 mm
Circular pitch9.42 mm
Face width18.00 mm
Bore20 mm: a light press fit on the plain style (it grips the shaft); a sliding fit on the hub style, held by the set screw
Hub (hub style)Ø33.50 × 10.00 mm, M5 × 5.7 brass set-screw insert, installed
Span over 5 teeth41.53 mm
MaterialNylon 12 (PA 12), laser sintered
Lead timeShips in 7 to 10 business days

Order

StylePart numberEach
Plain bore
20° PA, bore Ø20, allowance +0.05, 5 spoke windows
PG-S40-M300-22QHNF7R$241.65
Hub with set screw
20° PA, bore Ø20, allowance +0.1, hub Ø33.5×10 (top), 5 spoke windows, 1× M5 × 5.7 set-screw insert, installed, set screw max 1 N·m
PG-S40-M300-BVD3C7TT$252.30

No minimum quantity per part; orders have a $30 minimum before shipping. Shipping is $8 flat in the US.

Gears that mesh with it

Every Module 3 gear with a 20° pressure angle meshes with this one. Center distance = module × (teeth₁ + teeth₂) / 2.

Mating gearRatioCenter distance
12 teeth0.300 : 178.00 mm
14 teeth0.350 : 181.00 mm
15 teeth0.375 : 182.50 mm
16 teeth0.400 : 184.00 mm
18 teeth0.450 : 187.00 mm
20 teeth0.500 : 190.00 mm
22 teeth0.550 : 193.00 mm
24 teeth0.600 : 196.00 mm
25 teeth0.625 : 197.50 mm
28 teeth0.700 : 1102.00 mm
30 teeth0.750 : 1105.00 mm
32 teeth0.800 : 1108.00 mm
35 teeth0.875 : 1112.50 mm
36 teeth0.900 : 1114.00 mm
42 teeth1.050 : 1123.00 mm
45 teeth1.125 : 1127.50 mm
48 teeth1.200 : 1132.00 mm
50 teeth1.250 : 1135.00 mm
54 teeth1.350 : 1141.00 mm