Spur gear catalog › Module 3 › 36 teeth

Module 3 spur gear, 36 teeth

A 36-tooth involute spur gear, module 3, 20° pressure angle, printed to order in nylon 12. Choose a plain bore that presses onto the shaft, or a hub with a set screw, or open it in the generator to change the bore, hub or width and download free STEP, STL and DXF files.

PitchModule 3 (8.47 DP)
Pressure angle20°
Teeth36
Pitch diameter108.00 mm
Outside diameter114.00 mm
Root diameter100.50 mm
Base diameter101.49 mm
Circular pitch9.42 mm
Face width18.00 mm
Bore20 mm: a light press fit on the plain style (it grips the shaft); a sliding fit on the hub style, held by the set screw
Hub (hub style)Ø33.50 × 10.00 mm, M5 × 5.7 brass set-screw insert, installed
Span over 4 teeth32.51 mm
MaterialNylon 12 (PA 12), laser sintered
Lead timeShips in 7 to 10 business days

Order

StylePart numberEach
Plain bore
20° PA, bore Ø20, allowance +0.05, 6 spoke windows
PG-S36-M300-VDRSAG7B$199.19
Hub with set screw
20° PA, bore Ø20, allowance +0.1, hub Ø33.5×10 (top), 6 spoke windows, 1× M5 × 5.7 set-screw insert, installed, set screw max 1 N·m
PG-S36-M300-717YQMQ9$209.95

No minimum quantity per part; orders have a $30 minimum before shipping. Shipping is $8 flat in the US.

Gears that mesh with it

Every Module 3 gear with a 20° pressure angle meshes with this one. Center distance = module × (teeth₁ + teeth₂) / 2.

Mating gearRatioCenter distance
12 teeth0.333 : 172.00 mm
14 teeth0.389 : 175.00 mm
15 teeth0.417 : 176.50 mm
16 teeth0.444 : 178.00 mm
18 teeth0.500 : 181.00 mm
20 teeth0.556 : 184.00 mm
22 teeth0.611 : 187.00 mm
24 teeth0.667 : 190.00 mm
25 teeth0.694 : 191.50 mm
28 teeth0.778 : 196.00 mm
30 teeth0.833 : 199.00 mm
32 teeth0.889 : 1102.00 mm
35 teeth0.972 : 1106.50 mm
40 teeth1.111 : 1114.00 mm
42 teeth1.167 : 1117.00 mm
45 teeth1.250 : 1121.50 mm
48 teeth1.333 : 1126.00 mm
50 teeth1.389 : 1129.00 mm
54 teeth1.500 : 1135.00 mm