Spur gear catalog › Module 3 › 32 teeth

Module 3 spur gear, 32 teeth

A 32-tooth involute spur gear, module 3, 20° pressure angle, printed to order in nylon 12. Choose a plain bore that presses onto the shaft, or a hub with a set screw, or open it in the generator to change the bore, hub or width and download free STEP, STL and DXF files.

PitchModule 3 (8.47 DP)
Pressure angle20°
Teeth32
Pitch diameter96.00 mm
Outside diameter102.00 mm
Root diameter88.50 mm
Base diameter90.21 mm
Circular pitch9.42 mm
Face width18.00 mm
Bore20 mm: a light press fit on the plain style (it grips the shaft); a sliding fit on the hub style, held by the set screw
Hub (hub style)Ø33.50 × 10.00 mm, M5 × 5.7 brass set-screw insert, installed
Span over 4 teeth32.34 mm
MaterialNylon 12 (PA 12), laser sintered
Lead timeShips in 7 to 10 business days

Order

StylePart numberEach
Plain bore
20° PA, bore Ø20, allowance +0.05, 6 spoke windows
PG-S32-M300-559QBJFD$160.88
Hub with set screw
20° PA, bore Ø20, allowance +0.1, hub Ø33.5×10 (top), 6 spoke windows, 1× M5 × 5.7 set-screw insert, installed, set screw max 1 N·m
PG-S32-M300-J5P3DVM6$171.88

No minimum quantity per part; orders have a $30 minimum before shipping. Shipping is $8 flat in the US.

Gears that mesh with it

Every Module 3 gear with a 20° pressure angle meshes with this one. Center distance = module × (teeth₁ + teeth₂) / 2.

Mating gearRatioCenter distance
12 teeth0.375 : 166.00 mm
14 teeth0.438 : 169.00 mm
15 teeth0.469 : 170.50 mm
16 teeth0.500 : 172.00 mm
18 teeth0.563 : 175.00 mm
20 teeth0.625 : 178.00 mm
22 teeth0.688 : 181.00 mm
24 teeth0.750 : 184.00 mm
25 teeth0.781 : 185.50 mm
28 teeth0.875 : 190.00 mm
30 teeth0.938 : 193.00 mm
35 teeth1.094 : 1100.50 mm
36 teeth1.125 : 1102.00 mm
40 teeth1.250 : 1108.00 mm
42 teeth1.313 : 1111.00 mm
45 teeth1.406 : 1115.50 mm
48 teeth1.500 : 1120.00 mm
50 teeth1.563 : 1123.00 mm
54 teeth1.688 : 1129.00 mm