Spur gear catalog › Module 3 › 30 teeth

Module 3 spur gear, 30 teeth

A 30-tooth involute spur gear, module 3, 20° pressure angle, printed to order in nylon 12. Choose a plain bore that presses onto the shaft, or a hub with a set screw, or open it in the generator to change the bore, hub or width and download free STEP, STL and DXF files.

PitchModule 3 (8.47 DP)
Pressure angle20°
Teeth30
Pitch diameter90.00 mm
Outside diameter96.00 mm
Root diameter82.50 mm
Base diameter84.57 mm
Circular pitch9.42 mm
Face width18.00 mm
Bore20 mm: a light press fit on the plain style (it grips the shaft); a sliding fit on the hub style, held by the set screw
Hub (hub style)Ø33.50 × 10.00 mm, M5 × 5.7 brass set-screw insert, installed
Span over 4 teeth32.26 mm
MaterialNylon 12 (PA 12), laser sintered
Lead timeShips in 7 to 10 business days

Order

StylePart numberEach
Plain bore
20° PA, bore Ø20, allowance +0.05, 5 spoke windows
PG-S30-M300-G7MRJVM2$145.65
Hub with set screw
20° PA, bore Ø20, allowance +0.1, hub Ø33.5×10 (top), 5 spoke windows, 1× M5 × 5.7 set-screw insert, installed, set screw max 1 N·m
PG-S30-M300-GQFN6YG1$157.01

No minimum quantity per part; orders have a $30 minimum before shipping. Shipping is $8 flat in the US.

Gears that mesh with it

Every Module 3 gear with a 20° pressure angle meshes with this one. Center distance = module × (teeth₁ + teeth₂) / 2.

Mating gearRatioCenter distance
12 teeth0.400 : 163.00 mm
14 teeth0.467 : 166.00 mm
15 teeth0.500 : 167.50 mm
16 teeth0.533 : 169.00 mm
18 teeth0.600 : 172.00 mm
20 teeth0.667 : 175.00 mm
22 teeth0.733 : 178.00 mm
24 teeth0.800 : 181.00 mm
25 teeth0.833 : 182.50 mm
28 teeth0.933 : 187.00 mm
32 teeth1.067 : 193.00 mm
35 teeth1.167 : 197.50 mm
36 teeth1.200 : 199.00 mm
40 teeth1.333 : 1105.00 mm
42 teeth1.400 : 1108.00 mm
45 teeth1.500 : 1112.50 mm
48 teeth1.600 : 1117.00 mm
50 teeth1.667 : 1120.00 mm
54 teeth1.800 : 1126.00 mm