Spur gear catalog › Module 3 › 24 teeth

Module 3 spur gear, 24 teeth

A 24-tooth involute spur gear, module 3, 20° pressure angle, printed to order in nylon 12. Choose a plain bore that presses onto the shaft, or a hub with a set screw, or open it in the generator to change the bore, hub or width and download free STEP, STL and DXF files.

PitchModule 3 (8.47 DP)
Pressure angle20°
Teeth24
Pitch diameter72.00 mm
Outside diameter78.00 mm
Root diameter64.50 mm
Base diameter67.66 mm
Circular pitch9.42 mm
Face width18.00 mm
Bore15 mm: a light press fit on the plain style (it grips the shaft); a sliding fit on the hub style, held by the set screw
Hub (hub style)Ø28.50 × 10.00 mm, M5 × 5.7 brass set-screw insert, installed
Span over 3 teeth23.15 mm
MaterialNylon 12 (PA 12), laser sintered
Lead timeShips in 7 to 10 business days

Order

StylePart numberEach
Plain bore
20° PA, bore Ø15, allowance +0.05, 4 spoke windows
PG-S24-M300-MWQAMJ7H$102.16
Hub with set screw
20° PA, bore Ø15, allowance +0.1, hub Ø28.5×10 (top), 5 spoke windows, 1× M5 × 5.7 set-screw insert, installed, set screw max 1 N·m
PG-S24-M300-79HR63K7$114.32

No minimum quantity per part; orders have a $30 minimum before shipping. Shipping is $8 flat in the US.

Gears that mesh with it

Every Module 3 gear with a 20° pressure angle meshes with this one. Center distance = module × (teeth₁ + teeth₂) / 2.

Mating gearRatioCenter distance
12 teeth0.500 : 154.00 mm
14 teeth0.583 : 157.00 mm
15 teeth0.625 : 158.50 mm
16 teeth0.667 : 160.00 mm
18 teeth0.750 : 163.00 mm
20 teeth0.833 : 166.00 mm
22 teeth0.917 : 169.00 mm
25 teeth1.042 : 173.50 mm
28 teeth1.167 : 178.00 mm
30 teeth1.250 : 181.00 mm
32 teeth1.333 : 184.00 mm
35 teeth1.458 : 188.50 mm
36 teeth1.500 : 190.00 mm
40 teeth1.667 : 196.00 mm
42 teeth1.750 : 199.00 mm
45 teeth1.875 : 1103.50 mm
48 teeth2.000 : 1108.00 mm
50 teeth2.083 : 1111.00 mm
54 teeth2.250 : 1117.00 mm