Spur gear catalog › Module 3 › 20 teeth

Module 3 spur gear, 20 teeth

A 20-tooth involute spur gear, module 3, 20° pressure angle, printed to order in nylon 12. Choose a plain bore that presses onto the shaft, or a hub with a set screw, or open it in the generator to change the bore, hub or width and download free STEP, STL and DXF files.

PitchModule 3 (8.47 DP)
Pressure angle20°
Teeth20
Pitch diameter60.00 mm
Outside diameter66.00 mm
Root diameter52.50 mm
Base diameter56.38 mm
Circular pitch9.42 mm
Face width18.00 mm
Bore15 mm: a light press fit on the plain style (it grips the shaft); a sliding fit on the hub style, held by the set screw
Hub (hub style)Ø28.50 × 10.00 mm, M5 × 5.7 brass set-screw insert, installed
Span over 3 teeth22.98 mm
MaterialNylon 12 (PA 12), laser sintered
Lead timeShips in 7 to 10 business days

Order

StylePart numberEach
Plain bore
20° PA, bore Ø15, allowance +0.05, 6 spoke windows
PG-S20-M300-WYYKJZ76$78.40
Hub with set screw
20° PA, bore Ø15, allowance +0.1, hub Ø28.5×10 (top), 1× M5 × 5.7 set-screw insert, installed, set screw max 1 N·m
PG-S20-M300-32WKFJQ1$88.79

No minimum quantity per part; orders have a $30 minimum before shipping. Shipping is $8 flat in the US.

Gears that mesh with it

Every Module 3 gear with a 20° pressure angle meshes with this one. Center distance = module × (teeth₁ + teeth₂) / 2.

Mating gearRatioCenter distance
12 teeth0.600 : 148.00 mm
14 teeth0.700 : 151.00 mm
15 teeth0.750 : 152.50 mm
16 teeth0.800 : 154.00 mm
18 teeth0.900 : 157.00 mm
22 teeth1.100 : 163.00 mm
24 teeth1.200 : 166.00 mm
25 teeth1.250 : 167.50 mm
28 teeth1.400 : 172.00 mm
30 teeth1.500 : 175.00 mm
32 teeth1.600 : 178.00 mm
35 teeth1.750 : 182.50 mm
36 teeth1.800 : 184.00 mm
40 teeth2.000 : 190.00 mm
42 teeth2.100 : 193.00 mm
45 teeth2.250 : 197.50 mm
48 teeth2.400 : 1102.00 mm
50 teeth2.500 : 1105.00 mm
54 teeth2.700 : 1111.00 mm