Spur gear catalog › Module 3 › 18 teeth

Module 3 spur gear, 18 teeth

A 18-tooth involute spur gear, module 3, 20° pressure angle, printed to order in nylon 12. Choose a plain bore that presses onto the shaft, or a hub with a set screw, or open it in the generator to change the bore, hub or width and download free STEP, STL and DXF files.

PitchModule 3 (8.47 DP)
Pressure angle20°
Teeth18
Pitch diameter54.00 mm
Outside diameter60.00 mm
Root diameter46.50 mm
Base diameter50.74 mm
Circular pitch9.42 mm
Face width18.00 mm
Bore12 mm: a light press fit on the plain style (it grips the shaft); a sliding fit on the hub style, held by the set screw
Hub (hub style)Ø25.50 × 10.00 mm, M5 × 5.7 brass set-screw insert, installed
Span over 2 teeth14.04 mm
MaterialNylon 12 (PA 12), laser sintered
Lead timeShips in 7 to 10 business days

Order

StylePart numberEach
Plain bore
20° PA, bore Ø12, allowance +0.05
PG-S18-M300-F9DFFWP4$65.66
Hub with set screw
20° PA, bore Ø12, allowance +0.1, hub Ø25.5×10 (top), 1× M5 × 5.7 set-screw insert, installed, set screw max 1 N·m
PG-S18-M300-4D9RGJPZ$73.71

No minimum quantity per part; orders have a $30 minimum before shipping. Shipping is $8 flat in the US.

Gears that mesh with it

Every Module 3 gear with a 20° pressure angle meshes with this one. Center distance = module × (teeth₁ + teeth₂) / 2.

Mating gearRatioCenter distance
12 teeth0.667 : 145.00 mm
14 teeth0.778 : 148.00 mm
15 teeth0.833 : 149.50 mm
16 teeth0.889 : 151.00 mm
20 teeth1.111 : 157.00 mm
22 teeth1.222 : 160.00 mm
24 teeth1.333 : 163.00 mm
25 teeth1.389 : 164.50 mm
28 teeth1.556 : 169.00 mm
30 teeth1.667 : 172.00 mm
32 teeth1.778 : 175.00 mm
35 teeth1.944 : 179.50 mm
36 teeth2.000 : 181.00 mm
40 teeth2.222 : 187.00 mm
42 teeth2.333 : 190.00 mm
45 teeth2.500 : 194.50 mm
48 teeth2.667 : 199.00 mm
50 teeth2.778 : 1102.00 mm
54 teeth3.000 : 1108.00 mm