Spur gear catalog › Module 3 › 15 teeth

Module 3 spur gear, 15 teeth

A 15-tooth involute spur gear, module 3, 20° pressure angle, printed to order in nylon 12. Choose a plain bore that presses onto the shaft, or a hub with a set screw, or open it in the generator to change the bore, hub or width and download free STEP, STL and DXF files.

PitchModule 3 (8.47 DP)
Pressure angle20°
Teeth15
Pitch diameter45.00 mm
Outside diameter51.00 mm
Root diameter37.50 mm
Base diameter42.29 mm
Circular pitch9.42 mm
Face width18.00 mm
Bore10 mm: a light press fit on the plain style (it grips the shaft); a sliding fit on the hub style, held by the set screw
Hub (hub style)Ø23.50 × 10.00 mm, M5 × 5.7 brass set-screw insert, installed
Span over 2 teeth13.91 mm
MaterialNylon 12 (PA 12), laser sintered
Lead timeShips in 7 to 10 business days

Order

StylePart numberEach
Plain bore
20° PA, bore Ø10, allowance +0.05
PG-S15-M300-S6YMR6WC$46.05
Hub with set screw
20° PA, bore Ø10, allowance +0.1, hub Ø23.5×10 (top), 1× M5 × 5.7 set-screw insert, installed, set screw max 1 N·m
PG-S15-M300-YJZH4V95$53.39

No minimum quantity per part; orders have a $30 minimum before shipping. Shipping is $8 flat in the US.

Gears that mesh with it

Every Module 3 gear with a 20° pressure angle meshes with this one. Center distance = module × (teeth₁ + teeth₂) / 2.

Mating gearRatioCenter distance
12 teeth0.800 : 140.50 mm
14 teeth0.933 : 143.50 mm
16 teeth1.067 : 146.50 mm
18 teeth1.200 : 149.50 mm
20 teeth1.333 : 152.50 mm
22 teeth1.467 : 155.50 mm
24 teeth1.600 : 158.50 mm
25 teeth1.667 : 160.00 mm
28 teeth1.867 : 164.50 mm
30 teeth2.000 : 167.50 mm
32 teeth2.133 : 170.50 mm
35 teeth2.333 : 175.00 mm
36 teeth2.400 : 176.50 mm
40 teeth2.667 : 182.50 mm
42 teeth2.800 : 185.50 mm
45 teeth3.000 : 190.00 mm
48 teeth3.200 : 194.50 mm
50 teeth3.333 : 197.50 mm
54 teeth3.600 : 1103.50 mm