Spur gear catalog › Module 2.5 › 45 teeth

Module 2.5 spur gear, 45 teeth

A 45-tooth involute spur gear, module 2.5, 20° pressure angle, printed to order in nylon 12. Choose a plain bore that presses onto the shaft, or a hub with a set screw, or open it in the generator to change the bore, hub or width and download free STEP, STL and DXF files.

PitchModule 2.5 (10.16 DP)
Pressure angle20°
Teeth45
Pitch diameter112.50 mm
Outside diameter117.50 mm
Root diameter106.25 mm
Base diameter105.72 mm
Circular pitch7.85 mm
Face width15.00 mm
Bore15 mm: a light press fit on the plain style (it grips the shaft); a sliding fit on the hub style, held by the set screw
Hub (hub style)Ø28.50 × 10.00 mm, M5 × 5.7 brass set-screw insert, installed
Span over 5 teeth34.79 mm
MaterialNylon 12 (PA 12), laser sintered
Lead timeShips in 7 to 10 business days

Order

StylePart numberEach
Plain bore
20° PA, bore Ø15, allowance +0.05, 4 spoke windows
PG-S45-M250-HKEJY24V$181.71
Hub with set screw
20° PA, bore Ø15, allowance +0.1, hub Ø28.5×10 (top), 5 spoke windows, 1× M5 × 5.7 set-screw insert, installed, set screw max 1 N·m
PG-S45-M250-3YVFNW68$186.79

No minimum quantity per part; orders have a $30 minimum before shipping. Shipping is $8 flat in the US.

Gears that mesh with it

Every Module 2.5 gear with a 20° pressure angle meshes with this one. Center distance = module × (teeth₁ + teeth₂) / 2.

Mating gearRatioCenter distance
12 teeth0.267 : 171.25 mm
14 teeth0.311 : 173.75 mm
15 teeth0.333 : 175.00 mm
16 teeth0.356 : 176.25 mm
18 teeth0.400 : 178.75 mm
20 teeth0.444 : 181.25 mm
22 teeth0.489 : 183.75 mm
24 teeth0.533 : 186.25 mm
25 teeth0.556 : 187.50 mm
28 teeth0.622 : 191.25 mm
30 teeth0.667 : 193.75 mm
32 teeth0.711 : 196.25 mm
35 teeth0.778 : 1100.00 mm
36 teeth0.800 : 1101.25 mm
40 teeth0.889 : 1106.25 mm
42 teeth0.933 : 1108.75 mm
48 teeth1.067 : 1116.25 mm
50 teeth1.111 : 1118.75 mm
54 teeth1.200 : 1123.75 mm
56 teeth1.244 : 1126.25 mm
60 teeth1.333 : 1131.25 mm
64 teeth1.422 : 1136.25 mm