Spur gear catalog › Module 2.5 › 14 teeth

Module 2.5 spur gear, 14 teeth

A 14-tooth involute spur gear, module 2.5, 20° pressure angle, printed to order in nylon 12. Choose a plain bore that presses onto the shaft, or a hub with a set screw, or open it in the generator to change the bore, hub or width and download free STEP, STL and DXF files.

PitchModule 2.5 (10.16 DP)
Pressure angle20°
Teeth14
Pitch diameter35.00 mm
Outside diameter40.00 mm
Root diameter28.75 mm
Base diameter32.89 mm
Circular pitch7.85 mm
Face width15.00 mm
Bore8 mm: a light press fit on the plain style (it grips the shaft); a sliding fit on the hub style, held by the set screw
Hub (hub style)Ø23.00 × 9.00 mm, M4 × 6.4 brass set-screw insert, installed
Span over 2 teeth11.56 mm
MaterialNylon 12 (PA 12), laser sintered
Lead timeShips in 7 to 10 business days

Order

StylePart numberEach
Plain bore
20° PA, bore Ø8, allowance +0.05
PG-S14-M250-DCWRWZRY$23.91
Hub with set screw
20° PA, bore Ø8, allowance +0.1, hub Ø23×9 (top), 1× M4 × 6.4 set-screw insert, installed, set screw max 0.6 N·m
PG-S14-M250-VDE2T7DJ$30.66

No minimum quantity per part; orders have a $30 minimum before shipping. Shipping is $8 flat in the US.

Gears that mesh with it

Every Module 2.5 gear with a 20° pressure angle meshes with this one. Center distance = module × (teeth₁ + teeth₂) / 2.

Mating gearRatioCenter distance
12 teeth0.857 : 132.50 mm
15 teeth1.071 : 136.25 mm
16 teeth1.143 : 137.50 mm
18 teeth1.286 : 140.00 mm
20 teeth1.429 : 142.50 mm
22 teeth1.571 : 145.00 mm
24 teeth1.714 : 147.50 mm
25 teeth1.786 : 148.75 mm
28 teeth2.000 : 152.50 mm
30 teeth2.143 : 155.00 mm
32 teeth2.286 : 157.50 mm
35 teeth2.500 : 161.25 mm
36 teeth2.571 : 162.50 mm
40 teeth2.857 : 167.50 mm
42 teeth3.000 : 170.00 mm
45 teeth3.214 : 173.75 mm
48 teeth3.429 : 177.50 mm
50 teeth3.571 : 180.00 mm
54 teeth3.857 : 185.00 mm
56 teeth4.000 : 187.50 mm
60 teeth4.286 : 192.50 mm
64 teeth4.571 : 197.50 mm