Spur gear catalog › Module 2.5 › 20 teeth

Module 2.5 spur gear, 20 teeth

A 20-tooth involute spur gear, module 2.5, 20° pressure angle, printed to order in nylon 12. Choose a plain bore that presses onto the shaft, or a hub with a set screw, or open it in the generator to change the bore, hub or width and download free STEP, STL and DXF files.

PitchModule 2.5 (10.16 DP)
Pressure angle20°
Teeth20
Pitch diameter50.00 mm
Outside diameter55.00 mm
Root diameter43.75 mm
Base diameter46.98 mm
Circular pitch7.85 mm
Face width15.00 mm
Bore12 mm: a light press fit on the plain style (it grips the shaft); a sliding fit on the hub style, held by the set screw
Hub (hub style)Ø25.50 × 10.00 mm, M5 × 5.7 brass set-screw insert, installed
Span over 3 teeth19.15 mm
MaterialNylon 12 (PA 12), laser sintered
Lead timeShips in 7 to 10 business days

Order

StylePart numberEach
Plain bore
20° PA, bore Ø12, allowance +0.05, 6 spoke windows
PG-S20-M250-410RZKFB$46.66
Hub with set screw
20° PA, bore Ø12, allowance +0.1, hub Ø25.5×10 (top), 1× M5 × 5.7 set-screw insert, installed, set screw max 1 N·m
PG-S20-M250-3JFWJ3WC$55.45

No minimum quantity per part; orders have a $30 minimum before shipping. Shipping is $8 flat in the US.

Gears that mesh with it

Every Module 2.5 gear with a 20° pressure angle meshes with this one. Center distance = module × (teeth₁ + teeth₂) / 2.

Mating gearRatioCenter distance
12 teeth0.600 : 140.00 mm
14 teeth0.700 : 142.50 mm
15 teeth0.750 : 143.75 mm
16 teeth0.800 : 145.00 mm
18 teeth0.900 : 147.50 mm
22 teeth1.100 : 152.50 mm
24 teeth1.200 : 155.00 mm
25 teeth1.250 : 156.25 mm
28 teeth1.400 : 160.00 mm
30 teeth1.500 : 162.50 mm
32 teeth1.600 : 165.00 mm
35 teeth1.750 : 168.75 mm
36 teeth1.800 : 170.00 mm
40 teeth2.000 : 175.00 mm
42 teeth2.100 : 177.50 mm
45 teeth2.250 : 181.25 mm
48 teeth2.400 : 185.00 mm
50 teeth2.500 : 187.50 mm
54 teeth2.700 : 192.50 mm
56 teeth2.800 : 195.00 mm
60 teeth3.000 : 1100.00 mm
64 teeth3.200 : 1105.00 mm