Spur gear catalog › Module 2.5 › 22 teeth

Module 2.5 spur gear, 22 teeth

A 22-tooth involute spur gear, module 2.5, 20° pressure angle, printed to order in nylon 12. Choose a plain bore that presses onto the shaft, or a hub with a set screw, or open it in the generator to change the bore, hub or width and download free STEP, STL and DXF files.

PitchModule 2.5 (10.16 DP)
Pressure angle20°
Teeth22
Pitch diameter55.00 mm
Outside diameter60.00 mm
Root diameter48.75 mm
Base diameter51.68 mm
Circular pitch7.85 mm
Face width15.00 mm
Bore12 mm: a light press fit on the plain style (it grips the shaft); a sliding fit on the hub style, held by the set screw
Hub (hub style)Ø25.50 × 10.00 mm, M5 × 5.7 brass set-screw insert, installed
Span over 3 teeth19.22 mm
MaterialNylon 12 (PA 12), laser sintered
Lead timeShips in 7 to 10 business days

Order

StylePart numberEach
Plain bore
20° PA, bore Ø12, allowance +0.05, 5 spoke windows
PG-S22-M250-CF1DFQS9$53.91
Hub with set screw
20° PA, bore Ø12, allowance +0.1, hub Ø25.5×10 (top), 6 spoke windows, 1× M5 × 5.7 set-screw insert, installed, set screw max 1 N·m
PG-S22-M250-S5FM9P94$64.59

No minimum quantity per part; orders have a $30 minimum before shipping. Shipping is $8 flat in the US.

Gears that mesh with it

Every Module 2.5 gear with a 20° pressure angle meshes with this one. Center distance = module × (teeth₁ + teeth₂) / 2.

Mating gearRatioCenter distance
12 teeth0.545 : 142.50 mm
14 teeth0.636 : 145.00 mm
15 teeth0.682 : 146.25 mm
16 teeth0.727 : 147.50 mm
18 teeth0.818 : 150.00 mm
20 teeth0.909 : 152.50 mm
24 teeth1.091 : 157.50 mm
25 teeth1.136 : 158.75 mm
28 teeth1.273 : 162.50 mm
30 teeth1.364 : 165.00 mm
32 teeth1.455 : 167.50 mm
35 teeth1.591 : 171.25 mm
36 teeth1.636 : 172.50 mm
40 teeth1.818 : 177.50 mm
42 teeth1.909 : 180.00 mm
45 teeth2.045 : 183.75 mm
48 teeth2.182 : 187.50 mm
50 teeth2.273 : 190.00 mm
54 teeth2.455 : 195.00 mm
56 teeth2.545 : 197.50 mm
60 teeth2.727 : 1102.50 mm
64 teeth2.909 : 1107.50 mm