Spur gear catalog › Module 2.5 › 30 teeth

Module 2.5 spur gear, 30 teeth

A 30-tooth involute spur gear, module 2.5, 20° pressure angle, printed to order in nylon 12. Choose a plain bore that presses onto the shaft, or a hub with a set screw, or open it in the generator to change the bore, hub or width and download free STEP, STL and DXF files.

PitchModule 2.5 (10.16 DP)
Pressure angle20°
Teeth30
Pitch diameter75.00 mm
Outside diameter80.00 mm
Root diameter68.75 mm
Base diameter70.48 mm
Circular pitch7.85 mm
Face width15.00 mm
Bore15 mm: a light press fit on the plain style (it grips the shaft); a sliding fit on the hub style, held by the set screw
Hub (hub style)Ø28.50 × 10.00 mm, M5 × 5.7 brass set-screw insert, installed
Span over 4 teeth26.88 mm
MaterialNylon 12 (PA 12), laser sintered
Lead timeShips in 7 to 10 business days

Order

StylePart numberEach
Plain bore
20° PA, bore Ø15, allowance +0.05, 5 spoke windows
PG-S30-M250-WMW05RD8$86.37
Hub with set screw
20° PA, bore Ø15, allowance +0.1, hub Ø28.5×10 (top), 6 spoke windows, 1× M5 × 5.7 set-screw insert, installed, set screw max 1 N·m
PG-S30-M250-XEGK21AA$97.59

No minimum quantity per part; orders have a $30 minimum before shipping. Shipping is $8 flat in the US.

Gears that mesh with it

Every Module 2.5 gear with a 20° pressure angle meshes with this one. Center distance = module × (teeth₁ + teeth₂) / 2.

Mating gearRatioCenter distance
12 teeth0.400 : 152.50 mm
14 teeth0.467 : 155.00 mm
15 teeth0.500 : 156.25 mm
16 teeth0.533 : 157.50 mm
18 teeth0.600 : 160.00 mm
20 teeth0.667 : 162.50 mm
22 teeth0.733 : 165.00 mm
24 teeth0.800 : 167.50 mm
25 teeth0.833 : 168.75 mm
28 teeth0.933 : 172.50 mm
32 teeth1.067 : 177.50 mm
35 teeth1.167 : 181.25 mm
36 teeth1.200 : 182.50 mm
40 teeth1.333 : 187.50 mm
42 teeth1.400 : 190.00 mm
45 teeth1.500 : 193.75 mm
48 teeth1.600 : 197.50 mm
50 teeth1.667 : 1100.00 mm
54 teeth1.800 : 1105.00 mm
56 teeth1.867 : 1107.50 mm
60 teeth2.000 : 1112.50 mm
64 teeth2.133 : 1117.50 mm