Spur gear catalog › Module 2.5 › 42 teeth

Module 2.5 spur gear, 42 teeth

A 42-tooth involute spur gear, module 2.5, 20° pressure angle, printed to order in nylon 12. Choose a plain bore that presses onto the shaft, or a hub with a set screw, or open it in the generator to change the bore, hub or width and download free STEP, STL and DXF files.

PitchModule 2.5 (10.16 DP)
Pressure angle20°
Teeth42
Pitch diameter105.00 mm
Outside diameter110.00 mm
Root diameter98.75 mm
Base diameter98.67 mm
Circular pitch7.85 mm
Face width15.00 mm
Bore15 mm: a light press fit on the plain style (it grips the shaft); a sliding fit on the hub style, held by the set screw
Hub (hub style)Ø28.50 × 10.00 mm, M5 × 5.7 brass set-screw insert, installed
Span over 5 teeth34.68 mm
MaterialNylon 12 (PA 12), laser sintered
Lead timeShips in 7 to 10 business days

Order

StylePart numberEach
Plain bore
20° PA, bore Ø15, allowance +0.05, 4 spoke windows
PG-S42-M250-T0Q3RKYJ$159.76
Hub with set screw
20° PA, bore Ø15, allowance +0.1, hub Ø28.5×10 (top), 5 spoke windows, 1× M5 × 5.7 set-screw insert, installed, set screw max 1 N·m
PG-S42-M250-C44SETGH$165.88

No minimum quantity per part; orders have a $30 minimum before shipping. Shipping is $8 flat in the US.

Gears that mesh with it

Every Module 2.5 gear with a 20° pressure angle meshes with this one. Center distance = module × (teeth₁ + teeth₂) / 2.

Mating gearRatioCenter distance
12 teeth0.286 : 167.50 mm
14 teeth0.333 : 170.00 mm
15 teeth0.357 : 171.25 mm
16 teeth0.381 : 172.50 mm
18 teeth0.429 : 175.00 mm
20 teeth0.476 : 177.50 mm
22 teeth0.524 : 180.00 mm
24 teeth0.571 : 182.50 mm
25 teeth0.595 : 183.75 mm
28 teeth0.667 : 187.50 mm
30 teeth0.714 : 190.00 mm
32 teeth0.762 : 192.50 mm
35 teeth0.833 : 196.25 mm
36 teeth0.857 : 197.50 mm
40 teeth0.952 : 1102.50 mm
45 teeth1.071 : 1108.75 mm
48 teeth1.143 : 1112.50 mm
50 teeth1.190 : 1115.00 mm
54 teeth1.286 : 1120.00 mm
56 teeth1.333 : 1122.50 mm
60 teeth1.429 : 1127.50 mm
64 teeth1.524 : 1132.50 mm