Spur gear catalog › Module 2.5 › 35 teeth

Module 2.5 spur gear, 35 teeth

A 35-tooth involute spur gear, module 2.5, 20° pressure angle, printed to order in nylon 12. Choose a plain bore that presses onto the shaft, or a hub with a set screw, or open it in the generator to change the bore, hub or width and download free STEP, STL and DXF files.

PitchModule 2.5 (10.16 DP)
Pressure angle20°
Teeth35
Pitch diameter87.50 mm
Outside diameter92.50 mm
Root diameter81.25 mm
Base diameter82.22 mm
Circular pitch7.85 mm
Face width15.00 mm
Bore15 mm: a light press fit on the plain style (it grips the shaft); a sliding fit on the hub style, held by the set screw
Hub (hub style)Ø28.50 × 10.00 mm, M5 × 5.7 brass set-screw insert, installed
Span over 4 teeth27.06 mm
MaterialNylon 12 (PA 12), laser sintered
Lead timeShips in 7 to 10 business days

Order

StylePart numberEach
Plain bore
20° PA, bore Ø15, allowance +0.05, 5 spoke windows
PG-S35-M250-7N47W0EF$113.95
Hub with set screw
20° PA, bore Ø15, allowance +0.1, hub Ø28.5×10 (top), 6 spoke windows, 1× M5 × 5.7 set-screw insert, installed, set screw max 1 N·m
PG-S35-M250-1NP3ZX7S$122.14

No minimum quantity per part; orders have a $30 minimum before shipping. Shipping is $8 flat in the US.

Gears that mesh with it

Every Module 2.5 gear with a 20° pressure angle meshes with this one. Center distance = module × (teeth₁ + teeth₂) / 2.

Mating gearRatioCenter distance
12 teeth0.343 : 158.75 mm
14 teeth0.400 : 161.25 mm
15 teeth0.429 : 162.50 mm
16 teeth0.457 : 163.75 mm
18 teeth0.514 : 166.25 mm
20 teeth0.571 : 168.75 mm
22 teeth0.629 : 171.25 mm
24 teeth0.686 : 173.75 mm
25 teeth0.714 : 175.00 mm
28 teeth0.800 : 178.75 mm
30 teeth0.857 : 181.25 mm
32 teeth0.914 : 183.75 mm
36 teeth1.029 : 188.75 mm
40 teeth1.143 : 193.75 mm
42 teeth1.200 : 196.25 mm
45 teeth1.286 : 1100.00 mm
48 teeth1.371 : 1103.75 mm
50 teeth1.429 : 1106.25 mm
54 teeth1.543 : 1111.25 mm
56 teeth1.600 : 1113.75 mm
60 teeth1.714 : 1118.75 mm
64 teeth1.829 : 1123.75 mm