Spur gear catalog › Module 2.5 › 25 teeth

Module 2.5 spur gear, 25 teeth

A 25-tooth involute spur gear, module 2.5, 20° pressure angle, printed to order in nylon 12. Choose a plain bore that presses onto the shaft, or a hub with a set screw, or open it in the generator to change the bore, hub or width and download free STEP, STL and DXF files.

PitchModule 2.5 (10.16 DP)
Pressure angle20°
Teeth25
Pitch diameter62.50 mm
Outside diameter67.50 mm
Root diameter56.25 mm
Base diameter58.73 mm
Circular pitch7.85 mm
Face width15.00 mm
Bore15 mm: a light press fit on the plain style (it grips the shaft); a sliding fit on the hub style, held by the set screw
Hub (hub style)Ø28.50 × 10.00 mm, M5 × 5.7 brass set-screw insert, installed
Span over 3 teeth19.33 mm
MaterialNylon 12 (PA 12), laser sintered
Lead timeShips in 7 to 10 business days

Order

StylePart numberEach
Plain bore
20° PA, bore Ø15, allowance +0.05, 5 spoke windows
PG-S25-M250-ARTCCVMX$65.51
Hub with set screw
20° PA, bore Ø15, allowance +0.1, hub Ø28.5×10 (top), 6 spoke windows, 1× M5 × 5.7 set-screw insert, installed, set screw max 1 N·m
PG-S25-M250-1NJN41V7$77.75

No minimum quantity per part; orders have a $30 minimum before shipping. Shipping is $8 flat in the US.

Gears that mesh with it

Every Module 2.5 gear with a 20° pressure angle meshes with this one. Center distance = module × (teeth₁ + teeth₂) / 2.

Mating gearRatioCenter distance
12 teeth0.480 : 146.25 mm
14 teeth0.560 : 148.75 mm
15 teeth0.600 : 150.00 mm
16 teeth0.640 : 151.25 mm
18 teeth0.720 : 153.75 mm
20 teeth0.800 : 156.25 mm
22 teeth0.880 : 158.75 mm
24 teeth0.960 : 161.25 mm
28 teeth1.120 : 166.25 mm
30 teeth1.200 : 168.75 mm
32 teeth1.280 : 171.25 mm
35 teeth1.400 : 175.00 mm
36 teeth1.440 : 176.25 mm
40 teeth1.600 : 181.25 mm
42 teeth1.680 : 183.75 mm
45 teeth1.800 : 187.50 mm
48 teeth1.920 : 191.25 mm
50 teeth2.000 : 193.75 mm
54 teeth2.160 : 198.75 mm
56 teeth2.240 : 1101.25 mm
60 teeth2.400 : 1106.25 mm
64 teeth2.560 : 1111.25 mm