Spur gear catalog › Module 2.5 › 24 teeth

Module 2.5 spur gear, 24 teeth

A 24-tooth involute spur gear, module 2.5, 20° pressure angle, printed to order in nylon 12. Choose a plain bore that presses onto the shaft, or a hub with a set screw, or open it in the generator to change the bore, hub or width and download free STEP, STL and DXF files.

PitchModule 2.5 (10.16 DP)
Pressure angle20°
Teeth24
Pitch diameter60.00 mm
Outside diameter65.00 mm
Root diameter53.75 mm
Base diameter56.38 mm
Circular pitch7.85 mm
Face width15.00 mm
Bore15 mm: a light press fit on the plain style (it grips the shaft); a sliding fit on the hub style, held by the set screw
Hub (hub style)Ø28.50 × 10.00 mm, M5 × 5.7 brass set-screw insert, installed
Span over 3 teeth19.29 mm
MaterialNylon 12 (PA 12), laser sintered
Lead timeShips in 7 to 10 business days

Order

StylePart numberEach
Plain bore
20° PA, bore Ø15, allowance +0.05, 5 spoke windows
PG-S24-M250-CQH8XRN0$61.70
Hub with set screw
20° PA, bore Ø15, allowance +0.1, hub Ø28.5×10 (top), 6 spoke windows, 1× M5 × 5.7 set-screw insert, installed, set screw max 1 N·m
PG-S24-M250-FXG7K4K3$73.77

No minimum quantity per part; orders have a $30 minimum before shipping. Shipping is $8 flat in the US.

Gears that mesh with it

Every Module 2.5 gear with a 20° pressure angle meshes with this one. Center distance = module × (teeth₁ + teeth₂) / 2.

Mating gearRatioCenter distance
12 teeth0.500 : 145.00 mm
14 teeth0.583 : 147.50 mm
15 teeth0.625 : 148.75 mm
16 teeth0.667 : 150.00 mm
18 teeth0.750 : 152.50 mm
20 teeth0.833 : 155.00 mm
22 teeth0.917 : 157.50 mm
25 teeth1.042 : 161.25 mm
28 teeth1.167 : 165.00 mm
30 teeth1.250 : 167.50 mm
32 teeth1.333 : 170.00 mm
35 teeth1.458 : 173.75 mm
36 teeth1.500 : 175.00 mm
40 teeth1.667 : 180.00 mm
42 teeth1.750 : 182.50 mm
45 teeth1.875 : 186.25 mm
48 teeth2.000 : 190.00 mm
50 teeth2.083 : 192.50 mm
54 teeth2.250 : 197.50 mm
56 teeth2.333 : 1100.00 mm
60 teeth2.500 : 1105.00 mm
64 teeth2.667 : 1110.00 mm