Spur gear catalog › Module 2.5 › 18 teeth

Module 2.5 spur gear, 18 teeth

A 18-tooth involute spur gear, module 2.5, 20° pressure angle, printed to order in nylon 12. Choose a plain bore that presses onto the shaft, or a hub with a set screw, or open it in the generator to change the bore, hub or width and download free STEP, STL and DXF files.

PitchModule 2.5 (10.16 DP)
Pressure angle20°
Teeth18
Pitch diameter45.00 mm
Outside diameter50.00 mm
Root diameter38.75 mm
Base diameter42.29 mm
Circular pitch7.85 mm
Face width15.00 mm
Bore10 mm: a light press fit on the plain style (it grips the shaft); a sliding fit on the hub style, held by the set screw
Hub (hub style)Ø23.50 × 10.00 mm, M5 × 5.7 brass set-screw insert, installed
Span over 2 teeth11.70 mm
MaterialNylon 12 (PA 12), laser sintered
Lead timeShips in 7 to 10 business days

Order

StylePart numberEach
Plain bore
20° PA, bore Ø10, allowance +0.05
PG-S18-M250-0Z28Q8QC$38.93
Hub with set screw
20° PA, bore Ø10, allowance +0.1, hub Ø23.5×10 (top), 1× M5 × 5.7 set-screw insert, installed, set screw max 1 N·m
PG-S18-M250-T6113RT9$46.27

No minimum quantity per part; orders have a $30 minimum before shipping. Shipping is $8 flat in the US.

Gears that mesh with it

Every Module 2.5 gear with a 20° pressure angle meshes with this one. Center distance = module × (teeth₁ + teeth₂) / 2.

Mating gearRatioCenter distance
12 teeth0.667 : 137.50 mm
14 teeth0.778 : 140.00 mm
15 teeth0.833 : 141.25 mm
16 teeth0.889 : 142.50 mm
20 teeth1.111 : 147.50 mm
22 teeth1.222 : 150.00 mm
24 teeth1.333 : 152.50 mm
25 teeth1.389 : 153.75 mm
28 teeth1.556 : 157.50 mm
30 teeth1.667 : 160.00 mm
32 teeth1.778 : 162.50 mm
35 teeth1.944 : 166.25 mm
36 teeth2.000 : 167.50 mm
40 teeth2.222 : 172.50 mm
42 teeth2.333 : 175.00 mm
45 teeth2.500 : 178.75 mm
48 teeth2.667 : 182.50 mm
50 teeth2.778 : 185.00 mm
54 teeth3.000 : 190.00 mm
56 teeth3.111 : 192.50 mm
60 teeth3.333 : 197.50 mm
64 teeth3.556 : 1102.50 mm