Spur gear catalog › Module 2.5 › 12 teeth

Module 2.5 spur gear, 12 teeth

A 12-tooth involute spur gear, module 2.5, 20° pressure angle, printed to order in nylon 12. Choose a plain bore that presses onto the shaft, or a hub with a set screw, or open it in the generator to change the bore, hub or width and download free STEP, STL and DXF files.

PitchModule 2.5 (10.16 DP)
Pressure angle20°
Teeth12
Pitch diameter30.00 mm
Outside diameter35.00 mm
Root diameter23.75 mm
Base diameter28.19 mm
Circular pitch7.85 mm
Face width15.00 mm
Bore6 mm: a light press fit on the plain style (it grips the shaft); a sliding fit on the hub style, held by the set screw
Hub (hub style)Ø21.00 × 9.00 mm, M4 × 6.4 brass set-screw insert, installed
Span over 2 teeth11.49 mm
MaterialNylon 12 (PA 12), laser sintered
Lead timeShips in 7 to 10 business days

Order

StylePart numberEach
Plain bore
20° PA, bore Ø6, allowance +0.05
PG-S12-M250-JSNEX1Y8$17.97
Hub with set screw
20° PA, bore Ø6, allowance +0.1, hub Ø21×9 (top), 1× M4 × 6.4 set-screw insert, installed, set screw max 0.6 N·m
PG-S12-M250-KS87540Z$24.01

No minimum quantity per part; orders have a $30 minimum before shipping. Shipping is $8 flat in the US.

Gears that mesh with it

Every Module 2.5 gear with a 20° pressure angle meshes with this one. Center distance = module × (teeth₁ + teeth₂) / 2.

Mating gearRatioCenter distance
14 teeth1.167 : 132.50 mm
15 teeth1.250 : 133.75 mm
16 teeth1.333 : 135.00 mm
18 teeth1.500 : 137.50 mm
20 teeth1.667 : 140.00 mm
22 teeth1.833 : 142.50 mm
24 teeth2.000 : 145.00 mm
25 teeth2.083 : 146.25 mm
28 teeth2.333 : 150.00 mm
30 teeth2.500 : 152.50 mm
32 teeth2.667 : 155.00 mm
35 teeth2.917 : 158.75 mm
36 teeth3.000 : 160.00 mm
40 teeth3.333 : 165.00 mm
42 teeth3.500 : 167.50 mm
45 teeth3.750 : 171.25 mm
48 teeth4.000 : 175.00 mm
50 teeth4.167 : 177.50 mm
54 teeth4.500 : 182.50 mm
56 teeth4.667 : 185.00 mm
60 teeth5.000 : 190.00 mm
64 teeth5.333 : 195.00 mm