Spur gear catalog › Module 2 › 18 teeth

Module 2 spur gear, 18 teeth

A 18-tooth involute spur gear, module 2, 20° pressure angle, printed to order in nylon 12. Choose a plain bore that presses onto the shaft, or a hub with a set screw, or open it in the generator to change the bore, hub or width and download free STEP, STL and DXF files.

PitchModule 2 (12.70 DP)
Pressure angle20°
Teeth18
Pitch diameter36.00 mm
Outside diameter40.00 mm
Root diameter31.00 mm
Base diameter33.83 mm
Circular pitch6.28 mm
Face width12.00 mm
Bore8 mm: a light press fit on the plain style (it grips the shaft); a sliding fit on the hub style, held by the set screw
Hub (hub style)Ø23.00 × 9.00 mm, M4 × 6.4 brass set-screw insert, installed
Span over 2 teeth9.36 mm
MaterialNylon 12 (PA 12), laser sintered
Lead timeShips in 7 to 10 business days

Order

StylePart numberEach
Plain bore
20° PA, bore Ø8, allowance +0.05
PG-S18-M200-D2YH3ZVD$20.65
Hub with set screw
20° PA, bore Ø8, allowance +0.1, hub Ø23×9 (top), 1× M4 × 6.4 set-screw insert, installed, set screw max 0.6 N·m
PG-S18-M200-64Z88P5A$27.40

No minimum quantity per part; orders have a $30 minimum before shipping. Shipping is $8 flat in the US.

Gears that mesh with it

Every Module 2 gear with a 20° pressure angle meshes with this one. Center distance = module × (teeth₁ + teeth₂) / 2.

Mating gearRatioCenter distance
12 teeth0.667 : 130.00 mm
14 teeth0.778 : 132.00 mm
15 teeth0.833 : 133.00 mm
16 teeth0.889 : 134.00 mm
20 teeth1.111 : 138.00 mm
22 teeth1.222 : 140.00 mm
24 teeth1.333 : 142.00 mm
25 teeth1.389 : 143.00 mm
28 teeth1.556 : 146.00 mm
30 teeth1.667 : 148.00 mm
32 teeth1.778 : 150.00 mm
35 teeth1.944 : 153.00 mm
36 teeth2.000 : 154.00 mm
40 teeth2.222 : 158.00 mm
42 teeth2.333 : 160.00 mm
45 teeth2.500 : 163.00 mm
48 teeth2.667 : 166.00 mm
50 teeth2.778 : 168.00 mm
54 teeth3.000 : 172.00 mm
56 teeth3.111 : 174.00 mm
60 teeth3.333 : 178.00 mm
64 teeth3.556 : 182.00 mm
70 teeth3.889 : 188.00 mm
72 teeth4.000 : 190.00 mm
75 teeth4.167 : 193.00 mm
80 teeth4.444 : 198.00 mm