Spur gear catalog › Module 2 › 14 teeth

Module 2 spur gear, 14 teeth

A 14-tooth involute spur gear, module 2, 20° pressure angle, printed to order in nylon 12. Choose a plain bore that presses onto the shaft, or a hub with a set screw, or open it in the generator to change the bore, hub or width and download free STEP, STL and DXF files.

PitchModule 2 (12.70 DP)
Pressure angle20°
Teeth14
Pitch diameter28.00 mm
Outside diameter32.00 mm
Root diameter23.00 mm
Base diameter26.31 mm
Circular pitch6.28 mm
Face width12.00 mm
Bore6 mm: a light press fit on the plain style (it grips the shaft); a sliding fit on the hub style, held by the set screw
Hub (hub style)Ø21.00 × 9.00 mm, M4 × 6.4 brass set-screw insert, installed
Span over 2 teeth9.25 mm
MaterialNylon 12 (PA 12), laser sintered
Lead timeShips in 7 to 10 business days

Order

StylePart numberEach
Plain bore
20° PA, bore Ø6, allowance +0.05
PG-S14-M200-673588C7$12.82
Hub with set screw
20° PA, bore Ø6, allowance +0.1, hub Ø21×9 (top), 1× M4 × 6.4 set-screw insert, installed, set screw max 0.6 N·m
PG-S14-M200-W434DNDA$18.85

No minimum quantity per part; orders have a $30 minimum before shipping. Shipping is $8 flat in the US.

Gears that mesh with it

Every Module 2 gear with a 20° pressure angle meshes with this one. Center distance = module × (teeth₁ + teeth₂) / 2.

Mating gearRatioCenter distance
12 teeth0.857 : 126.00 mm
15 teeth1.071 : 129.00 mm
16 teeth1.143 : 130.00 mm
18 teeth1.286 : 132.00 mm
20 teeth1.429 : 134.00 mm
22 teeth1.571 : 136.00 mm
24 teeth1.714 : 138.00 mm
25 teeth1.786 : 139.00 mm
28 teeth2.000 : 142.00 mm
30 teeth2.143 : 144.00 mm
32 teeth2.286 : 146.00 mm
35 teeth2.500 : 149.00 mm
36 teeth2.571 : 150.00 mm
40 teeth2.857 : 154.00 mm
42 teeth3.000 : 156.00 mm
45 teeth3.214 : 159.00 mm
48 teeth3.429 : 162.00 mm
50 teeth3.571 : 164.00 mm
54 teeth3.857 : 168.00 mm
56 teeth4.000 : 170.00 mm
60 teeth4.286 : 174.00 mm
64 teeth4.571 : 178.00 mm
70 teeth5.000 : 184.00 mm
72 teeth5.143 : 186.00 mm
75 teeth5.357 : 189.00 mm
80 teeth5.714 : 194.00 mm