Spur gear catalog › Module 2 › 16 teeth

Module 2 spur gear, 16 teeth

A 16-tooth involute spur gear, module 2, 20° pressure angle, printed to order in nylon 12. Choose a plain bore that presses onto the shaft, or a hub with a set screw, or open it in the generator to change the bore, hub or width and download free STEP, STL and DXF files.

PitchModule 2 (12.70 DP)
Pressure angle20°
Teeth16
Pitch diameter32.00 mm
Outside diameter36.00 mm
Root diameter27.00 mm
Base diameter30.07 mm
Circular pitch6.28 mm
Face width12.00 mm
Bore8 mm: a light press fit on the plain style (it grips the shaft); a sliding fit on the hub style, held by the set screw
Hub (hub style)Ø23.00 × 9.00 mm, M4 × 6.4 brass set-screw insert, installed
Span over 2 teeth9.30 mm
MaterialNylon 12 (PA 12), laser sintered
Lead timeShips in 7 to 10 business days

Order

StylePart numberEach
Plain bore
20° PA, bore Ø8, allowance +0.05
PG-S16-M200-H41J60DV$16.30
Hub with set screw
20° PA, bore Ø8, allowance +0.1, hub Ø23×9 (top), 1× M4 × 6.4 set-screw insert, installed, set screw max 0.6 N·m
PG-S16-M200-DH8WA02B$23.05

No minimum quantity per part; orders have a $30 minimum before shipping. Shipping is $8 flat in the US.

Gears that mesh with it

Every Module 2 gear with a 20° pressure angle meshes with this one. Center distance = module × (teeth₁ + teeth₂) / 2.

Mating gearRatioCenter distance
12 teeth0.750 : 128.00 mm
14 teeth0.875 : 130.00 mm
15 teeth0.938 : 131.00 mm
18 teeth1.125 : 134.00 mm
20 teeth1.250 : 136.00 mm
22 teeth1.375 : 138.00 mm
24 teeth1.500 : 140.00 mm
25 teeth1.563 : 141.00 mm
28 teeth1.750 : 144.00 mm
30 teeth1.875 : 146.00 mm
32 teeth2.000 : 148.00 mm
35 teeth2.188 : 151.00 mm
36 teeth2.250 : 152.00 mm
40 teeth2.500 : 156.00 mm
42 teeth2.625 : 158.00 mm
45 teeth2.813 : 161.00 mm
48 teeth3.000 : 164.00 mm
50 teeth3.125 : 166.00 mm
54 teeth3.375 : 170.00 mm
56 teeth3.500 : 172.00 mm
60 teeth3.750 : 176.00 mm
64 teeth4.000 : 180.00 mm
70 teeth4.375 : 186.00 mm
72 teeth4.500 : 188.00 mm
75 teeth4.688 : 191.00 mm
80 teeth5.000 : 196.00 mm