Spur gear catalog › Module 2 › 15 teeth

Module 2 spur gear, 15 teeth

A 15-tooth involute spur gear, module 2, 20° pressure angle, printed to order in nylon 12. Choose a plain bore that presses onto the shaft, or a hub with a set screw, or open it in the generator to change the bore, hub or width and download free STEP, STL and DXF files.

PitchModule 2 (12.70 DP)
Pressure angle20°
Teeth15
Pitch diameter30.00 mm
Outside diameter34.00 mm
Root diameter25.00 mm
Base diameter28.19 mm
Circular pitch6.28 mm
Face width12.00 mm
Bore6 mm: a light press fit on the plain style (it grips the shaft); a sliding fit on the hub style, held by the set screw
Hub (hub style)Ø21.00 × 9.00 mm, M4 × 6.4 brass set-screw insert, installed
Span over 2 teeth9.28 mm
MaterialNylon 12 (PA 12), laser sintered
Lead timeShips in 7 to 10 business days

Order

StylePart numberEach
Plain bore
20° PA, bore Ø6, allowance +0.05
PG-S15-M200-JBMRFSWA$14.68
Hub with set screw
20° PA, bore Ø6, allowance +0.1, hub Ø21×9 (top), 1× M4 × 6.4 set-screw insert, installed, set screw max 0.6 N·m
PG-S15-M200-7YG7NX5A$20.72

No minimum quantity per part; orders have a $30 minimum before shipping. Shipping is $8 flat in the US.

Gears that mesh with it

Every Module 2 gear with a 20° pressure angle meshes with this one. Center distance = module × (teeth₁ + teeth₂) / 2.

Mating gearRatioCenter distance
12 teeth0.800 : 127.00 mm
14 teeth0.933 : 129.00 mm
16 teeth1.067 : 131.00 mm
18 teeth1.200 : 133.00 mm
20 teeth1.333 : 135.00 mm
22 teeth1.467 : 137.00 mm
24 teeth1.600 : 139.00 mm
25 teeth1.667 : 140.00 mm
28 teeth1.867 : 143.00 mm
30 teeth2.000 : 145.00 mm
32 teeth2.133 : 147.00 mm
35 teeth2.333 : 150.00 mm
36 teeth2.400 : 151.00 mm
40 teeth2.667 : 155.00 mm
42 teeth2.800 : 157.00 mm
45 teeth3.000 : 160.00 mm
48 teeth3.200 : 163.00 mm
50 teeth3.333 : 165.00 mm
54 teeth3.600 : 169.00 mm
56 teeth3.733 : 171.00 mm
60 teeth4.000 : 175.00 mm
64 teeth4.267 : 179.00 mm
70 teeth4.667 : 185.00 mm
72 teeth4.800 : 187.00 mm
75 teeth5.000 : 190.00 mm
80 teeth5.333 : 195.00 mm