Spur gear catalog › 32 DP › 20 teeth

32 DP spur gear, 20 teeth

A 20-tooth involute spur gear, 32 diametral pitch, 20° pressure angle, printed to order in nylon 12. Choose a plain bore that presses onto the shaft, or a hub with a set screw, or open it in the generator to change the bore, hub or width and download free STEP, STL and DXF files.

Pitch32 DP (module 0.794)
Pressure angle20°
Teeth20
Pitch diameter0.625" (15.88 mm)
Outside diameter0.688" (17.46 mm)
Root diameter0.547" (13.89 mm)
Base diameter0.587" (14.92 mm)
Circular pitch0.098" (2.49 mm)
Face width3/16" (4.76 mm)
Bore1/8" (3.17 mm): a light press fit on the plain style (it grips the shaft); a sliding fit on the hub style, held by the set screw
Hub (hub style)Ø11.00 × 7.00 mm, M2 × 2.5 brass set-screw insert, installed
Span over 3 teeth0.239" (6.08 mm)
MaterialNylon 12 (PA 12), laser sintered
Lead timeShips in 7 to 10 business days

Order

StylePart numberEach
Plain bore
20° PA, bore Ø3.175, allowance +0.05
PG-S20-M079-K40DPR82$1.99
Hub with set screw
20° PA, bore Ø3.175, allowance +0.1, hub Ø11×7 (top), 1× M2 × 2.5 set-screw insert, installed, set screw max 0.1 N·m
PG-S20-M079-VPE6S81F$4.46

No minimum quantity per part; orders have a $30 minimum before shipping. Shipping is $8 flat in the US.

Gears that mesh with it

Every 32 DP gear with a 20° pressure angle meshes with this one. Center distance = (teeth₁ + teeth₂) / (2 × DP).

Mating gearRatioCenter distance
12 teeth0.600 : 10.500" (12.70 mm)
14 teeth0.700 : 10.531" (13.49 mm)
15 teeth0.750 : 10.547" (13.89 mm)
16 teeth0.800 : 10.563" (14.29 mm)
18 teeth0.900 : 10.594" (15.08 mm)
22 teeth1.100 : 10.656" (16.67 mm)
24 teeth1.200 : 10.688" (17.46 mm)
25 teeth1.250 : 10.703" (17.86 mm)
28 teeth1.400 : 10.750" (19.05 mm)
30 teeth1.500 : 10.781" (19.84 mm)
32 teeth1.600 : 10.813" (20.64 mm)
35 teeth1.750 : 10.859" (21.83 mm)
36 teeth1.800 : 10.875" (22.22 mm)
40 teeth2.000 : 10.938" (23.81 mm)
42 teeth2.100 : 10.969" (24.61 mm)
45 teeth2.250 : 11.016" (25.80 mm)
48 teeth2.400 : 11.063" (26.99 mm)
50 teeth2.500 : 11.094" (27.78 mm)
54 teeth2.700 : 11.156" (29.37 mm)
56 teeth2.800 : 11.188" (30.16 mm)
60 teeth3.000 : 11.250" (31.75 mm)
64 teeth3.200 : 11.313" (33.34 mm)
70 teeth3.500 : 11.406" (35.72 mm)
72 teeth3.600 : 11.438" (36.51 mm)
75 teeth3.750 : 11.484" (37.70 mm)
80 teeth4.000 : 11.563" (39.69 mm)
90 teeth4.500 : 11.719" (43.66 mm)
100 teeth5.000 : 11.875" (47.63 mm)