Double gears and gear trains
A double gear, or cluster gear, is two gears on one body that turn together. It is the building block of the compound gear train, which gives a large reduction in a small space.
Compound trains
A single pair is limited to about 6 : 1 before the pinion becomes too small or the gear too large. A compound train multiplies ratios: the large gear of one double gear is driven by a pinion, and its small gear drives the next stage.
i = (z₂ / z₁) · (z₄ / z₃) · …
Two stages of 12 driving 36 give 3 × 3 = 9 : 1; three stages give 27 : 1. This is how clocks, servos and gearmotors get large ratios from small gears.
Designing a double gear
- The two gears can have different modules. The small gear often carries more torque per tooth, so it may need a coarser module.
- Check the small gear's root diameter against the bore. The wall between the root and the bore must be thick enough to carry the torque.
- Printing both gears as one part removes the press fit, key or adhesive that joins two separate gears, and keeps them concentric.
Design a double gear with two tooth counts, two face widths and, if you like, two modules. Open the generator.